Chill Vents for Aluminium Die Casting

Chill vents for aluminium die casting need to pull heat out fast and survive constant thermal cycling. NGK Berylco supplies beryllium copper chill vents built for the job. NGK Berylco France has been one of Europe's leading high precision processors of beryllium copper strip since 1971, and UK customers are looked after from the NGK Berylco UK office in Salford.

Beryllium copper, also called beryllium bronze, adds between 0.4% and 2% beryllium to copper, with small additions of nickel, cobalt, iron, aluminium or lead. After heat treatment it reaches tensile strengths up to 1500 N/mm² and hardness up to 450 HV, while conductivity runs from around 22% to 70% IACS depending on grade. It is non-magnetic, non-sparking, corrosion resistant and works from cryogenic to elevated temperatures.

Choosing a beryllium copper grade comes down to balancing strength, conductivity and how the part will be made. C17200 is the all-rounder. C17300 suits screw machined parts. C17510 is the pick when current carrying matters most.

Mill hardened strip saves a heat treatment step, while solution annealed material gives the most freedom to form complex shapes before hardening. NGK Berylco's technical team can help pin down the right grade and temper.

Aluminium die casters need tooling that pulls heat out fast and stands up to repeated thermal cycling. High conductivity and good strength make beryllium copper a proven choice for chill vents and die components.

The core NGK Berylco grades are C17200 (CuBe2, Berylco 25) for high strength, C17300 (CuBe2Pb, Berylco 33/25) for free machining and C17510 (CuNi2Be, Berylco 14) for high conductivity. They are supplied as strip, wire, rod and plate or block, plus chill vents and non-sparking safety tools. Material can be supplied annealed or cold worked for forming and heat treated afterwards, or mill hardened in Type-B and Type-S tempers ready to use.

NGK Berylco also runs a scrap recycling and buyback programme. Recovered material is remelted into alloy of identical composition, which cuts waste and helps customers hit their sustainability targets. All of this sits under ISO 9001, EN 9100, ISO 14001 and ISO 45001.

Need a price or technical advice on Chill Vents for Aluminium Die Casting? Call NGK Berylco UK on +44 (0)161 745 7162 or email enquiries@ngkberylco.co.uk with your grade, form, temper and quantity.